Application > Installation > Network Requirements

It very important to verify that the network is configured to accept and work with WebBrix.

Verify the following:

•TCP port 4050 (from PC to VertX) and port 4070 (from VertX to PC) are available and not being blocked by a firewall or router.

•TCP port 2571 (ASSA ABl Lockset) is available and not being blocked by a firewall or router.

•Port 80 (for HTTP communication) is available and not being blocked by a firewall or router.

•Ports 23 (for Telnet) and Port 20 & 21 (for FTP) are available and not being blocked by a firewall or router.

HID VertX/Edge/EVO Packet Sizes:

The following explains the average packet size for common network communications between a VertX/EDGE/EVO controller and WebBrix.

Packet Sizes

Traffic Causes	Total Traffic	Controller Send	Host Send (estimates)
Card Add/Modify/Delete	326 bytes	76 bytes	250 bytes
Discovery Process *	34 Kbytes	7 Kbytes	27 Kbytes
HereIAm Exchange	300 bytes	221 bytes	76 bytes
Single Event/Alarm	326 bytes	250 bytes	76 bytes
Command (open door)	326 bytes	76 bytes	250 bytes
Average Traffic Total *	1 Kbytes per second

* Determined by as average V1000 installation that includes a controller, two V100 panels, four Wiegand readers, four schedules, and 100 cards.

ASSA ABLOY Bandwidth

•Each lockset has a maximum memory of 3 MB, thus 3 MB is the largest amount of data the lock is able to transmit. 3 MB transfers are only possible during initial setup or after a sustained network outage.

•The average lockset will move between 5kB and 10kB of data in total per day.